Archive for September, 2009

Presto la finirò di sprecare carta!


2009
09.20

Specifications

  • Model:
ER0140-002-000 (iLiad 2nd Edition)
  • Price: 599€ (incl VAT and shipping to europe)
  • Intel XScale-PXA255 rev 6 (v5l) (swp half thumb fastmult edsp) CPU running at 400Mhz/100MHz (with firmware 2.11)
  • 64MB DRAM (roughly 48MB available to applications)
  • 256MB FLASH (128MB available via USB for content storage)
  • Linux Operating System (2.4.19-rmk7-pxa2)
  • 8.1″ 1024×768 16 grayscale e-paper (E Ink) screen (slightly smaller than A5 size)
  • Wacom Penabled touch screen
  • MMC slot (MMC and SD up to 1 GB, SD cards must be SD spec. 1.0 compliant)
  • CF slot (support for up to 32GB cards and microdrives) Memory cards list
  • 802.11 b/g WiFi (specs)
  • 10/100 Ethernet (requires travel hub)
  • Built in monaural speaker.
  • 3.5mm stereo headphone jack.
  • USB 1.1 with Type A port on unit and Type B port on travel hub.
  • Battery (v1): ATL 513475, 1100mAh @ 3.7V, proprietary, not customer replaceable. Charging time 3-4 hours.
  • Nine buttons and “page flip bar” on front of unit.
  • Sliding power switch on bottom right edge of unit.
  • Docking port, currently only used by travel hub, bottom middle edge of unit.
  • Wacom stylus and slot to hold it when not in use.

Pros:

  • Resolution: 160dpi, 1024×768, 16 grayscales
  • Open source operating system (Linux)
  • Content planned by various international newspaper companies with trials currently on-going or planned for the near future.
  • E-ink screen is visible indoors and outdoors, including in full sunlight.
  • SDK is available for third-party software development and ssh access. It was also mentioned that any additional readers/software people write, and submit to iRex, will be considered for release via the iDS system.
  • Thousands free and priced ebooks via Mobipocket.
  • Touch screen with stylus for note taking.

Cons:

  • Expensive in comparison to other dedicated ebook reading devices.
  • Short Battery Life and not as advertised (admitted by iRex never to surpass approx. 10 hours, 15 hours with new, larger battery)
  • No suspend mode.
  • USB port for data transfer is USB 1.1 only.
  • Problematic SD memory card support. Recommended use of MMC (up to 1GB) or CF (up to 32GB) instead.
  • Warranty repairs require return to Germany.

Altre info su questo perfetto wiki

New project


2009
09.06

Maybe you have a small linux server in your home, or maybe you are managing hundreds of them. And maybe are you tired to spend all your nights and days to set all notifications (sms, email, or also Twitter…) for the backup software, the logwatch, the IDS…

Stay tuned!

Arch vs. VirtualBox


2009
09.04

Tanto per provare, ho scaricato Arch linux e la sto provando su una macchina virtuale con VirtualBox (sistema operativo Ubuntu 9.04). Pare che l’attuale versione di VirtualBox PUEL che viene installata su Ubuntu (precisamente la 3.0.4 r50677) abbia alcuni problemi con il kernel 2.6.30-5.

Avviando una macchina virtuale con l’ultimo cd di Arch si scopre che il boot si interrompe durante il caricamento di udev; per risolvere ho scaricato la versione precedente (da qui), installata e poi, dopo aver aggiornato solo pacman, configurato /etc/pacman.conf per ignorare eventuali updates del kernel, modificando la riga:

#IgnorePkg =

in

IgnorePkg = kernel26 kernel-headers glibc binutils findutils

Al successivo pacman -Syu il sistema si lamenterà un po’ ma basta farlo proseguire e tutto dovrebbe filare liscio…

Meno male che su macchine reali il problema non si dovrebbe presentare…attendiamo con ansia la patch di VirtualBox

Mi trovate anche su identi.ca


2009
09.03

Da oggi mi trovate anche su identi.ca, come si può evincere dai nuovi widget della barra laterale. Ovviamente il nome è sempre quello…

Uscita la versione 1.4.10 di GnuPG


2009
09.03

Per tutti quelli che usano le OpenPGP card v2: siamo tutti contenti di sapere che è uscita la versione 1.4.10 che dovrebbe gestire finalmente questa versione di smart card.

Compilarlo su Ubuntu 9.04 non dovrebbe richiedere neanche l’installazione di librerie particolari: dopo aver scaricato l’archivio compresso da qui (sono circa 10Mb), l’ho estratto e installato come al solito con

./configure --prefix=/home/vostroutente/bin/ && make && make install

A questo punto è bene mettere al sicuro (non si sa mai) la propria cartella .gnupg che dovrebbe trovarsi nella nostra home e lasciare che venga ricreata automatcamente dalla nuova versione di GnuPG.

Se vogliamo ovviamente lanciarlo da qualsiasi postazione aggiungiamo la cartella /home/vostroutente/bin al PATH et voilà…dovremmo essere in grado di lanciarlo da ogni dove.

Purtroppo non ho ancora provato la card che ho preso qui, ma appena arrivo a casa compilo e aggiorno il post…

EDIT:

Ho fatto un piccolo deb per chi ha Jaunty e volesse installarlo con dpkg…è il primo deb che faccio con checkinstall, quindi non mi assumo responsabilità!

gnupg_1.4.10-1_i386

EDIT2:

Ho testato e funziona alla perfezione con Jaunty e le OpenPGP card v2!